Grass grid value: is the use of Germany's advanced technology of high-density polyethylene made from 100% recycled plastic, which is environmentally friendly, recyclable, it can be UV, anti-severe stamping. After the use of lawn coverage of 95%, load-bearing capacity of 200 t / m2, while it addresses the shortcomings of grass brick can be used to dry and hot area grass grid specification is 41x41x5.0cm, b) grass grid construction method: its Construction Method and grass brick similar to concrete are: ① the original pit real, ② made according to the original soil surface with gravel truck parking situation 20cm ~ 30cm of the support layer, 2 ~ 3cm sand / sand mixture, ③ laying grass grid, ④ Finally sod. Lined up a number of grass grid can also be arranged in a trapezoid. Each grass grid should stitching intact, as required by generic tools which can be made curved or other shapes. Grass bottom staggered grid may make it a good fixedly mounted on the ground. If need be framed in the peripheral block area or fixed screw (supplied) to fix it, in order to avoid thermal expansion may occur in the case of grass grid, must be reserved 1 ~ 1.5cm seam between each grass grid. Grass to two steps. ① first base layer of soil fill, ② then watering the soil, making it stable, ③ then sprinkle with seeds or direct turfed. ④ When sprinkle seeds should then sprinkle some soil so that the soil and planting grass grid top contour. During the seeds germinate ⑤ must always watering, do not travel on the newly planted turf, turf once fully grown, this area can be put into use. The parking lawn lawn after use and general, need daily watering, fertilizing and mowing, etc. c) grass grid Scope: upscale living communities, parking, fire road, golf driveway, a roof garden, exhibition center, a modern factories and so on. Grass grid provides more than 95% of the grass area, totally green effect, sound-absorbing, vacuuming, significantly improved the quality and taste of the environment